- Dual ring chainguide with 6061-T6 backplate and removable direct mount bashguard - Replaceable upper sharkfin wearplate prevents chain drop and allows front shifting - Dual-position lower roller provides chain tension and security - Includes both 32-36t and 36-40t direct-mount bashguards - ISCG-05 models are adjustable for 48-53mm chainlines - 149g - Range: 32-40t
absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 5-bolt outer and inner road oval, 130 BCD 5-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 5
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the SRAM cranksets that have removable Direct Mount spiders and are only compatible with CAMO rings and bolts. Four different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - M2 (minus 2mm - dished toward the frame): For 49mm chainline on short-spindle BB30 cranks - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank. Can also be used to achieve a Boost chainline with a short-spindle BB30 crank.
Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
- Crank Arm Length: 170mm - Interface: Power Spline - Position: Left
- Duraluminum alloy outer bolt set with Torx T30 fitting, wrench included
The Shimano Deore XT FC-M8120 crankset features modern construction using direct mount chainrings and a 178mm Q-factor for 12-speed MTB drivetrains. - Hollow forged crank maximizes power transfer while limiting weight - Rigid and lightweight design for aggressive trail riding - Shimano's Hollowtech II technology provides the best balance of stiffness, strength, weight and rotating performance. - 178mm Q-factor - 51.8mm chainline - Exchangeable single/double chainring - Number of Chainrings: Double - Chainline/Hub Compatibility: 141/148 Boost Hubs - Spindle Interface Type: Shimano Hollowtech II - Chainring BCD: Direct Mount - Pedal Spindle: 9/16" - Crank Intended Use: Mountain - Crank Length: 175mm - Rings: 36/26 - Drivetrain Speeds: 12 - BB Included: No
- 2-PIECE CRANKSET for 157 mm O.L.D. frames - DYNAMIC CHAIN ENGAGEMENT+ improves chain engagement and retention - Q-factor 181 mm - Direct mount chainring - Chain Line 56.5 mm - 1x12-speed
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact. - For Descendant Carbon and non-Eagle XX1 and X01
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0
$288.00 - $326.00
SRAM's Force 22 Crankset uses unidirectional carbon arms with a forged aluminum spider and integrated bottom-bracket axle to ensure top-notch stiffness for awesome power transfer and exceptionally low weights. Experience phenomenal front shifting with SRAM's X Glide R chainrings that start out as 5mm-thick aluminum plates and then precision machined to eliminate all unessential material while retaining extreme stiffness. With so much great technology and 11-speed compatibility, they're a force to be reckoned with.
The SRAM NX crankset delivers Eagle styling and performance to the newest addition to the Eagle ecosystem. Designed for SRAM's X-SYNC 2 chainrings, the NX crankset is engineered for complete chain control—each tooth's profile is precisely engineered to work quietly, efficiently, and securely with the Eagle chain's inner and outer links. DUB technology features a better-engineered bottom bracket and a new spindle design, which together allows for a more uniform approach to bottom bracket fitment, better sealing against contamination and forward and backward compatibility. Now everyone can benefit from a new measure of performance and durability. - 6000 series forged aluminum arms - 52.0mm chainline
Sprint-worthy stiffness meets climb-friendly weight in SRAM's RED Crankset. Advanced analysis of pedaling forces has yielded a hollow construction design that incorporates an integrated, four-arm spider and larger crank arms to achieve the lofty weight and strength goals. Together with X Glide R chainrings and a RED front derailleur (sold separately), your front shifting will receive a major boost in speed, efficiency, and simplicity. SRAM's new X Glide R chainrings start out as 5mm-thick aluminium plates which are precision machined to eliminate all unessential material while retaining extreme stiffness to provide fast, crisp shifting. And SRAM didn't stop there; plenty of attention was given to the placement of the shift pins and ramps, which are optimized to coordinate your shifts with your natural cadence.
$69.00 - $101.00
The SRAM SX Eagle Crankset includes Eagle platform styling and features at an entry-level price point. SX Eagle cranks are compatible with all levels with SRAM Eagle drivetrain systems. - Offers the same chain retention performance as seen in all higher-level Eagle drivetrain cranks - 32T direct mount X-SYNC 2 steel chainring included - Aluminum crank arms - 11/12-speed compatible - Bottom bracket sold separately
Precision, stiffness and power are yours with SRAM's X0 Crankset. It boasts carbon arms with a forged aluminum spine for mountain-topping stiffness and seriously low weight. Gear changes are just as impressive as the stiffness-to-weight ratio thanks to SRAM's super-stiff X-glide chainrings that deliver lightning-quick shifting that you'll have to experience to believe. With the weight of a feather and the stiffness of an I-beam, SRAM's X0 cranks are your ticket to off-road heaven. - Bottom bracket sold separately
Suntour's XCM-T is a 9-speed triple crankset with melt forged alloy arms that comes in either square taper or Octalink bottom bracket options. - Steel chain rings - Forged alloy crank arms - 50mm chain line with a 113mm BB
The Race Face Aeffect crank is designed to handle aggressive trail riding at XC crank weight with an attractive pricepoint. It features the CINCH system with interchangeable spider options and a 24mm EXI interface spindle, compatible with RaceFace X-Type and Hollowtech compatible bottom brackets. The Aeffect is compatible with all CINCH direct mount rings and spiders to easily convert between existing chainring standards including: direct mount, 1x, 2x, and 3x configurations. - Direct mount chainline: 50-52mm, 56.5-58.5mm (flipped) - Spindle interface: RaceFace EXI - Weight: 745g
$9.99 - $11.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)
RaceFace CINCH Spindle - Fits 135/142 and 141/148mm Hub Spacing
$9.99 - $11.99
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks
Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.
Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.
Replacement crank bolt and puller cap set for Race Face Cinch cranksets.
- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks - RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost) - Mounts using a common Park BBT-22 tool
Replacement CINCH Preload Ring for non-driveside Race Face CINCH cranks
The RIDE crank arm set offers CINCH versatility, adaptable chainring options, and the 24mm EXI interface system for easier installation and removal. This set is a budget-friendly option with signature RaceFace styling, performance and craftsmanship. - Offers CINCH system compatibility - 24mm EXI interface for easier crank installation - Forged from 6066 aluminum with aggressive styling for a high strength to weight ratio - Compatible with CINCH direct mount alloy or steel rings - Direct mount chainline: 78.5mm / 85mm (Flipped Ring) - 2X Cinch spider chainline: 77mm - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 190/197 Hubs - Crank Intended Use: Fat Bike - Pedal Spindle: 9/16" - Spindle Interface Type: RaceFace EXI - Chainring BCD: Direct Mount CINCH - BB Included: No
Replacement crank bolt/puller set for Race Face NEXT XC, SIXC, and 2088 and newer Deus cranks.
$6.79 - $18.69
Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for double and triple chainrings, each set includes 5 male/female bolts to securely connect your chain rings to the crank. Available in black and silver, as well as aluminum or steel.
Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for inner triple chainrings, each set includes 5 male bolts to securly connect your chainrings to your crank.
$10.19 - $20.99
Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum bolts. • Set of 5 male/female bolts • Inside measures 4mm when tightened, 7mm total height
Page 1 of 2 Next page