Filter By:
- Parts & Accessories (8)
- Hitch-Mount (7)
- Pickup/RV/Spare-Tire Mount (6)
- Roof-Mount (2)
- Trunk-Mount (1)
- Show More Brands
- Show Fewer Brands
Car Racks
$36.99
- Powdercoated steel body with 9mm skewer & hole in handle for padlock
$39.99
- For carrying unique frames on hang-on type car racks
- Quick release clamp adjusts to fit between stem and seatpost
- Rubberized hooks protect bikes finish
$259.00
Our most adjustable and advanced tailgate pad, the Mission allows your tonneau cover to fully close and lock. A two-panel, full coverage design can adjust for almost any height of tailgate and downtube attachment points are customizable for your fleet of bikes. Durable PVC tarpaulin on the outside and a micro-brushed inner lining to keep your tailgate scratch-free.
Available in three sizes:
- 2-Bike (up to 2 bikes) - partial tailgate coverage for most trucks
- Mid-Size (up to 5 bikes) - for Small and Mid-Size Trucks (Tacoma, Ranger, Frontier etc.)
- Full-Size (up to 6 bikes) - for Full Size Trucks (F-150 to F-350, 1500 - 3500 series, Tundra and Titan)
$39.99
So the international bike builder didn’t consider your bike rack design when creating his new full suspension frame? No worries. Kuat’s Ubar can adapt almost any frame to fit our Alpha or Beta rack.
Features
- Adapts oddly shaped frames for use with hanging style racks
- Spring loaded for a solid fit
- Coated hooks (prevent wear on your bike)
- Installs in seconds
- Fits most bikes
$89.00
For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.
$598.00
When your solo ride turns into a weekend expedition with friends, the NV 2.0 Add-On lets you increase the NV 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front.
- Adjustable front tire cradle system
- Fully integrated cable locks
- Trail Doc compatible
- Front tire ratchet design with an intuitive release
- Rear tire strap features a co-molded strap to protect wheels
- Premium gloss metallic powder with water transferred logos
- Compatible with 2” NV 2.0
- Increases 2” NV 2.0 carrying capacity to 4 bicycles weighing up to 40 - pounds each
- Holds wheelbases up to 48” and tires as large as 4.8”
- Quick change from 2 to 4 bikes
Introducing the GigaWatt, our advanced two-bike hitch rack designed for electric bicycles weighing up to 80 pounds each (RV and 5th Wheel limitations). Unlike other ebike racks, the GigaWatt addresses common issues, offering frame protection, fender compatibility, robust locking, and a generous bike spacing. Enjoy effortless bike loading and peace of mind on the road with the GigaWatt. A ramp for heavier bikes will support owner.
The HighNoon FC Solo is the first and only rack in the RockyMounts' family that supports use of bikes with fenders. The rack includes an upswept base allowing for better departure angle, as well as a tiered platform for handlebar clearance. The dual strap system allows for secure transport for bikes with and without fenders.
- Compatible with bikes with fenders
- Compatible with bikes without fenders
- Carries 1 bike, up to 60 lbs. Expandable to 2 bikes, up to 60 lbs per tray, with Add-On
- No contact with frame, secures bicycle by front wheel
- Carries road tires up to 5.0" fat bike tires, and diameters from 20" to 29"
- Compatible with bicycle wheelbases from 36" to 50"
- Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access
- Includes anti-wobble hitch pin
- Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike
- Rack weight 29 lbs (shipping weight 35 lbs)
- Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the doors
$14.95 - $19.95
Use the RockyMounts Lock Cores to secure your belongings, whether you're using the TieRod, PitchFork, TailPipe, LiftOp or any other RockyMounts rack. Each pack of Lock Cores comes with two keys and one, two, four, six, or eight lock cores.
$49.95
The RockyMounts HotRod is a do-it-all truck mount for bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.
$49.95
The RockyMounts LoBall Locking is a bolt-on bike rack for trucks, trailers, vans, SUV's, and home storage. It includes a locking 9mm quick release, lock core, and two keys.
$54.95
RockyMounts StreetRod is a thru-axle adapter that works with fork-mounted bike racks from any manufacturer. It includes axles to accommodate bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.
$89.95
The Swiss Army of truck racks is now even better. Redesigned to save previous real estate in truck beds, the DriveShaft Track is better than ever before. 12mm, 15mm, 20mm thru-axle bike rack carrier for truck bed channels found in Toyota, Chevy, GMC, and Nissan. RockyMounts DriveShaft is the first on the market with the ability to carry 12/15/20mm thru-axles and to securely lock your bike. The mouth opens wide for easy loading and the cam lever adjusts like a quick release for a strong hold. Snap-in nylon shims prevent the axle from being unscrewed and allows you to switch between 12mm, 15mm, and 20mm loads.
$99.99
Utilizing RockyMounts premium 3-axis anti wobble system; Allows BackStage, MonoRail, and SplitRail racks to fold flat against vehicles with spare tires. Works well for bike racks including Thule, Yakima & Kuat.
Product Features:
- Extends rack 8 inches from receiver
- Only for 2-inch hitch receivers
- Uses RockyMounts 3-axis anti wobble system
- Reduces vehicle hitch capacity by 50%
- Ideal for vehicles with spare tires, recessed hitches or van doors
- Includes locking hitch pin with premium lock pod, can be keyed alike
- 10lbs
$299.99
Expand the carrying capacity of your GuideRail from a 2 bike set up to a 3 bike setup. Not Compatible with the AfterParty or 1.25" GuideRail
- Compatible with GuideRail 2" Expandable to 3 bikes up to 45 lbs per tray, with Add-On (2" Only.)
- Lowers max weight capacity from 60 lbs per tray to 45 lbs per tray
- Bike can be loaded asymmetrically to eliminate handlebar interference
- No contact with frame or fork, secures bicycle by contact with tires only
- Carries 19mm road tires up to 3.0" wide mountain bike tires, and diameters from 20" to 29"
- Compatible with bicycle wheelbases from 36" to 55"
- Not for use with fender equipped bicycle
- Rack weight 18lbs (Shipping weight 23lbs)
- Includes another chain to allow you to lock all three bikes.
$499.99
The MonoRail is the most versatile rack in the RockyMounts line up. It has the capacity for all styles of bikes; from skinny tire road machines, up to heavy fat tire E-bikes, this rack has you covered.
- Carries 2 bikes, up to 60 lbs per tray (120 lbs total). 2” variant is expandable to 3 bikes up to 45 lbs per tray, with Add-On
- No contact with frame, secures bicycle by front wheel
- Carries road tires up to 5.0” fat bike tires, and diameters from 20” to 29”
- Compatible with bicycle wheelbases from 36” to 50”
- Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access
- Includes anti-wobble hitch pin
- If you want to fit both 1.25" and 2" size hitches, get the 1.25" and our adaptor sleeve. This configuration does not allow for the use of an Add-On
- Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike
- Note: Cable lock is not intended to be used while driving. Road vibrations can cause unintended wear on frames, rims, and the rack itself. Please remove cable lock when vehicle is in motion
- Not for use with fender equipped bicycles
- Rack weight 39 lbs (shipping weight 51 lbs)
- Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the door
$579.95
The HighNoon FC is the first and only rack in the RockyMounts' family that supports use of bikes with fenders. The rack includes an upswept base allowing for better departure angle, as well as a tiered platform for handlebar clearance. The dual strap system allows for secure transport for bikes with and without fenders.
- Compatible with bikes with fenders
- Compatible with bikes without fenders
- Carries 2 bikes, up to 60 lbs per tray (120 lbs total). 2" variant is expandable to 3 bikes up to 45 lbs per tray, with Add-On
- No contact with frame, secures bicycle by front wheel
- Carries road tires up to 5.0" fat bike tires, and diameters from 20" to 29"
- Compatible with bicycle wheelbases from 36" to 50"
- Folds flat against the vehicle and tilts down 30 degrees to allow for hatch access
- Includes anti-wobble hitch pin
- If you want to fit both 1.25" and 2" size hitches, get the 1.25" and the adaptor sleeve. This configuration does not allow for the use of an Add-On
- Includes locking hitch bolt, cable lock, and standard lock pods, keyed alike
- Rack weight 39 lbs (shipping weight 49 lbs)
- Fit Memo- For cargo vans (vehicles with flat backs), Depending on hitch placement, handlebar width, an 8" Hitch Extension may be required for wide mountain bike handlebars to clear the doors.
$849.99
The GuideRail steps away from the traditional carrying style of platform hitch racks; By utilizing dual load arms, the rack completely eliminates frame or fork contact, it allows for asymmetric bike loading to avoid handlebar interference, and it creates a simple aesthetic that virtually blends in with most vehicles. The GuideRail reduces plastic parts to a minimum and maintains the same capacity and reliability of the MonoRail Family. Carrying bikes up to 60lbs per tray, tires up to 3” wide, and wheelbases up to 55” the GuideRail can handle just about anything including most E-bikes. Included is a 10mm square link chain to secure your bikes without stress.
If you need to fit both 1.25" & 2" Hitches, purchase the 1.25" and the GuideRail 1.25" to 2" Adapter Sleeve here (limit 2 bikes)
- Carries 2 bikes, up to 60 lbs per tray (120 lbs total). Expandable to 3 bikes up to 45 lbs per tray, with Add-On (2" Only)
- Bike can be loaded asymmetrically to eliminate handlebar interference
- No contact with frame or fork, secures bicycle by contact with tires only
- Carries 19mm road tires up to 3.0” wide mountain bike tires, and diameters from 20” to 29”
- Compatible with bicycle wheelbases from 36” to 55”
- Folds flat against the vehicle, and tilts down 30 degrees to allow for hatch access
- Available for 1.25” and 2” Class II or higher hitch receivers
- Utilizes RockyMounts premium 3-axis anti wobble system
- Included 10mm square link chain provides best in class security
- Not for use with fender equipped bicycles
- Rack weight 49 lbs (shipping weight 61 lbs)
- Fit Memo- For cargo vans a fit check is required. Depending on hitch manufacturer, handlebar width, vehicle wheelbase, and accessories an 8" Hitch Extension may be required for handlebars to clear the door.
$899.95
Introducing the GigaWatt, our advanced two-bike hitch rack designed for electric bicycles weighing up to 80 pounds each (RV and 5th Wheel limitations, see below). Unlike other ebike racks, the GigaWatt addresses common issues, offering frame protection, fender compatibility, robust locking, and a generous bike spacing. Enjoy effortless bike loading and peace of mind on the road with the GigaWatt.
- Developed for electric bikes, works for standard bikes as well
- 2 Bike Hitch Rack for 2" Hitches
- Aluminum ramp included for effortless loading
- Fender Compatible
- Contacts the front tire only, no frame contact
- Aluminum wheel trays accommodate wheelbases from 34" to 55"
- Wheel sizes 20" to 29" and up to 4.5" wide
- 3 axis anti-wobble hitch bolt is rock solid in the hitch
- 8mm square link security chain included provides better security than cables
- Same key locks bikes to rack, rack to car
- Fold flat against the car and down 30 degrees for hatch access
- Locks included, keyed alike, locks rack to car and bikes to rack
- 15" spacing between bikes allows plenty of clearance and no interference when using a ramp
- Pull handle for folding is easily accessible to stow and use rack
- Rack Weight 64lbs
- RV Rated and 5th Wheel (no travel trailers) with reduced weight ratings
$199.99
The arch is arguably the most important engineering feat in human history. One look at Saris’ Bones 2-Bike rack would make any ancient Roman proud. With three incredibly strong, arched leg mounts and two arched arms, you can rest assured that your bike is in solid hands. Six highly adjustable straps, each equipped with soft coated hooks, hold the rack down, while the three legs have grippy rubber feet to provide a sturdy base. Ratcheting anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers.
$24.99 - $33.99
Sunlite's versatile Bike Block Quick Release Fork Mount is a handy bike mount that you can install in your vehicle, pickup truck bed or on virtually any flat surface. It features a sturdy 9mm-diameter quick release to securely support your 2-wheeler by its fork. And, the Bike Block is made of heavy-duty metal for strength and reliability. Plus, it features a pass-through hole for locking your rig with a cable lock, too.
$13.99
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
$39.00
This fork adapter allows you to put your thru-axle fork on any 9mm fork-mounted bike rack.
- Axle not included. Works with your bike's thru-axle
- Fits all fork bike mounts including, Yakima, Thule, Rocky Mounts, etc.
- Built-in safety tabs
- Durable black powder-coat finish
Product Specs:
- Weight: 0.32 – 0.38 lbs.
- Minimum Crossbar Spread 16in
- Maximum Crossbar Spread 42in
- Limited Lifetime Warranty
$399.00
Hitch rack swing adapter.
Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido.
Product Details:
- Hitch extension converts most 2" hitch products to a swing-away rack
- Provides easy tailgate access - even with a rack fully loaded with bikes
- Easily swings open 90 degrees and locks in place with the simple to use release lever
- Safety latch secures the rack closed while you're on the road
- Secures to any 2" hitch receiver using a threaded pin
- Included SKS (Same Key System) lock keeps the rack secure
- 250 lb maximum load capacity (rack plus gear)
Product Specs:
- Weight: 35.46 lbs
- Dimensions: L 20.00" x W 30.00" x H 8.00"
Installation Details:
- Some Assembly Required
- 10 Minute Install
- 2" Hitch Receiver Required
Compatible with the following:
- Dr.Tray- 2" only (without the EZ+1 attached)
- SingleSpeed
- HangOver 4 - 4 Bike only
- TwoTimer
- HoldUp EVO
- HoldUp EVO +2
- HoldUp
- HoldUp +2
- FourTimer
- LongHaul (Vans and Passenger Vehicles Only)
- RoadTrip (Vans and Passenger Vehicles Only)
Page 1 of 1