Filter By:
- Bar Ends (1)
- BMX (7)
- Bottom Brackets (24)
- Brakes/Levers/Pads (112)
- Cables (41)
- Cassettes/Freewheels (34)
- Chainrings (93)
- Chains (43)
- Show More Categories
- Cranksets (38)
- Derailleurs (39)
- Forks (8)
- Groups (7)
- Handlebar Grips/Tape (61)
- Handlebars (33)
- Headsets (22)
- Pedals (52)
- Saddles (34)
- Seatposts (21)
- Shift/Brake Combinations (7)
- Shifters (33)
- Shocks (2)
- Stems (26)
- Other (233)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$4.00
- Noodle/Boot completely seal brake cable, upgrades most linear brakes
$19.00 - $27.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$25.00 - $38.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$25.00
Avid's Front 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the front of your bike. Kits include mounting bolts and post mount spacers for front brake installation.
$27.00 - $62.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
$27.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$27.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$27.00 - $34.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$29.00
- Includes stainless steel bolts
- 40mm fits 200mm Front and 180mm Rear Rotors
$22.99
The Box Three BMX chain is polished and then chemically treated to achieve corrosion resistance. All Box Three chains have chamfered shifting edges, solid plates and solid pins to safeguard durability. Our unique inner link spacing is engineered to grab those modern wide/narrow chainrings. They are compatible with BMX 3/32" and 1/8" chainrings and cogs which fits most retro-modern 29 inch BMX bikes and smaller bikes.
$49.99
- CNC-machined 6061-T6 aluminum with rounded tooth profile to reduce chain wear
$69.99 - $79.99
- Cold-forged, CNC-machined 6061-T6 aluminum with built-in return spring
- Clamp integrates with ODI Lock-On grips
- 50g
- Chromoly construction
- Classic BMX design
- Material: Cro-Mo
- Setback: 0mm
- Fits 3-piece 22mm BMX cranks
- 2mm 6061 aluminum core
- Includes adapter for 19mm spindles
- Teeth: 25T
- Chain Compatibility: Singlespeed
- Tooth Type: Standard
$13.99
- Upper cables measured from brake lever to detangler top plate
- Lower cables are measured from detangler to cable stop/London mod
- Includes adjusters compatible with most detangler styles
- Use: Upper
- Length: 7.5 – 9.5-inch
- Diameter: 1.5mm
$30.99 - $32.99
- Durable nylon+fiber body
- Heat-treated chromoly spindle
- Molded pins
- Loose ball bearings
- 375g/pair
$31.99
- Forged alloy construction
- Double bolt centering design
- Oversize 6mm hex bolts
$125.39 - $125.99
Enduro has unquestionably evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wingsuit type accuracy. This Stem was born out of rider's demands for precision and for those moments when you have to be inch-perfect.
Taking design elements from our World Cup-winning Direct Mount MK3 Stem and splicing these with our critically acclaimed Enduro MK2 Stem.
We developed the Stem specifically with Pro's and Bro's alike. It was obvious we all live for the same challenge of pushing our own limits. As riders, we want a Stem that inspires confidence to change lines through the middle of a rock garden like it's no big deal or slap the inside of a turn and translate all your weight to front-wheel traction. Providing ear-to-ear grins and saying to your mates at the bottom of a trail, "Did you see that?".
From the start of the design process, it became clear that we wanted extra rigidity. To yield this, we would need to make the Stem using a forging process - a new thing for us. The result of this allowed us to achieve a more intricate shape than machining alone. It involves applying a huge amount of force to redirect the grain flow of the material. As a result, this gives superior strength, fatigue and impact resistance.
Another area where we made a significant improvement in rigidity was by increasing the clamping surface area on the steerer tube. We've vastly increased this to give a stout, rock-solid feel and as close to the MK3 Direct Mount Stem as we could. Furthermore, everything is held securely by stainless steel bolts to ensure there is no rust even in the grimmest weather. In addition and like every Burgtec product, it's fully CNC machined and anodized in all your favourite flavours.
Tested with the world's fastest jibbers and sendiest racers, this stem has everything you need to hit all those rowdy racing lines or pull that little bit harder off that big sender.
- Forged and Fully CNC machined from AL6061 – T6 Aluminium
- Stainless Steel Hardware
- Available lengths - 35mm, 42.5mm and 50mm
- Available in both 31.8mm (Black only) and 35mm Clamp
- Weight: 35mm 138g, 42.5mm 152g, 50mm 160g
Ultra-Link Chains designed to maximize performance with Campagnolo drivetrains, while increasing durability and power transmission.
- Delivers extremely high performance levels and durability over time
- Design is optimized to perform with teeth on sprockets and crowns of Chorus drivetrain components
- Solid pins are aligned with the external surface for smoothness and precision
- 5.15mm width is designed to produce faster and lighter shifting
Specifications:
- Links: 110
- Chain Connection Type: Pressed Pin
- Half Link Chain: No
- Drivetrain Speeds: 12
- Weight: 241g
$45.45
The Campagnolo C13 EKAR Chain was developed specifically for the EKAR 1x13-speed gravel system.
- Wide-narrow design allows for efficient drive, smooth shifts and high security
- The narrow profile is lightweight, strong, and efficient
- Strong, durable, links feature different grades of steel and coatings for strength and to withstand wear
- Unique ultrasound bath lubrication impregnation system for long chain life
- Uses a classic pin chain connector
Specifications:
- Links: 118
- Chain Connection Type: Pressed Pin
- Drivetrain Speeds: 13
- Weight: 242g
$65.00
Thanks to Campagnolo's Ultra-Drive system, the Veloce Cassette offers precise, fluid shifting. The teeth are carefully machined and treated for flawless gear changes and outstanding durability. Plus, the special cog patterns interface perfectly with the rest of Campy's drivetrain components for outstanding shifting.
$169.76
Campagnolo's Chorus Cassette offers precise, fluid shifting for your 11-speed drivetrain. The teeth have been exquisitely engineered and machined from steel, then coated with a nickel-chrome surface treatment and mounted on an aluminum carrier for flawless shifts and excellent durability.
Add another braking option to your road or cross bars with Cane Creek's Cross Top Brake Levers. They are a great way to gain more control on technical cyclocross courses by enabling braking from the tops of the bars.
$6.00
Replacement bushings for Cane Creek shocks.
$9.00
Simple, economical threadless post mount caliper brake pads.
- Rubber compound improves performance over many OE pads
$10.99 - $15.99
Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.
$11.50
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$12.00
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Durable steel construction
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 47mm lower headset bearings
- Compatible with 33mm (1-1/4") tapered steerer tubes
- Lightweight aluminum construction
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 40mm (1-1/2") tapered steerer tubes
- Durable steel construction
Page 1 of 32
Next page