Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap onto your big-wheeled bike. It's made of tubular aluminum, fits most bikes with disc brakes, hauls up to 55 pounds and has a center strip that acts like a short fender. It's compatible with Topeak's QuickTrack bags and accessories (sold separately), too.
If you have to carry a bunch of gear, you're going to need a front rack. Sunlite's Gold Tec Front Rack has a capacity of 40 pounds, turning your bike into a serious workhorse. It's made from tubular aluminum and mounts to most fork bosses.
- Used for attaching rear racks onto mono stay bikes - Rubber coated steel for all weather durability
Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.
The Down Under HD Rack is the recommended lowrider for world touring. Sturdy and dependable, the steel construction lends itself well to field repairs should a worst-case scenario occur. - Requires dual-sided, mid-blade mounts - Wide crossbars provide sturdy, secure attachment points for a pannier - Tubular 4130 CroMoly construction - Mounting system provides 35mm range of infinite adjustment to position the rack - Includes mounting hardware kit - Powdercoat finish - Maximum Recommended Load: 55lbs (25kg) - Sold in pairs - Requires inner and outer mid-blade eyelets
Salsa's Wanderlust Rear Rack carries essentials for touring and bikepacking over the rear wheel of your bike. It's constructed from aluminum to keep the weight down and features multiple cross bars for panniers, a taillight mounting bracket, and a long, cupped deck to load up your gear. For easy installation, the Wanderlust features long, very adjustable struts.
The Portland Design Works Bindle Rack is a seatpost-mounted rack designed to easily haul your gear on multi-day cycling tours or just across town. The rack is constructed of lightweight alloy and mounts to any size seatpost in seconds. Heavy-duty compression straps loop through saddle rails to carry your cargo. The Bindle Rack helps to prevent side-to-side sway while riding and rear wheel rub for riders with short seat posts. Place your tent, sleeping bag, drybag, or other gear directly onto the Rack platform and pull the compression straps tight to secure the load up against the bottom of your saddle. - Rack mount fits seatposts with diameters 22.0 - 31.6mm - Rack deck measures 133 x 343mm (5.25 x 13.5") - Total Rack length: 432 mm (17") - Rack weight: .35kg (13 ounces) - Rated to 5.34kg - Lifetime PDWarranty
$29.99 - $32.99
Planet Bike's Eco Rack is made of oversize tubular 6061-aluminum for maximum strength and stability. It's designed to provide complete heel clearance when you install packs. And, the pre-installed rack hardware makes it a cinch to mount the Eco Rack to your bike, too. This rack fits most road, mountain and hybrid bicycles and even includes a built-in platform, which doubles as a mini-fender on rainy rides.
Planet Bike's Versa Rack means your steed with disc brakes can finally be made into a rack-packing workhorse. It's 6061-aluminum construction provides maximum strength and stability. Thanks to the clever design you'll have complete heel clearance when you install packs. Plus, the pre-installed rack hardware makes it a cinch to mount the Versa Rack to your bike.
When it's time to ditch the backpack, the back soreness and the back sweat, look no further than the MSW Pork Chop Light rack. It's got plenty of capacity for those key items on your journey. This model is designed to fit bikes with disc brakes. - Fits bikes with disc brakes: offset with integrated spacer - W-bend stays keep pannier hooks in place - Holds up to 40 lbs. of cargo - Top platform dimensions are 310mm x 112mm
- Extra rigidity from triangulated rear strut safety design - carries the load like an extension of the frame - Extra-long connector arms and adjustable height legs for increased fit versatility - Flat-packed to save space - All-aluminum tubing construction is lightweight but strong enough to handle 40lbs - Stainless steel nuts and bolts
- Welded, powder coated aluminum with either quick release or bolt-on - Fits any seatpost up to 32.0mm diameter and can handle 25lbs
- Secure clamp fits any seat post size (24-32mm diameter) - Quick-release seatpost attachment - Reflector bracket included - Rubber grippers keep loads in place - Weighs 520 grams - Recommended cargo limit: 20lbs - 19.5" from attachment point to end of rack, platform 4.5" wide, 12.5" long Note: Not for use with carbon fiber seatposts
A disk brake compatible update of the original rear rack design where it all began for Blackburn in 1975 - Mounting system works with disc brake frames and bikes lacking rear dropout rack mounts - Lower mounting points attach to included extra-long QR skewer - Three strut design for maximum load control - 12mm gauge aircraft-grade aluminum rod ensures long lasting durability - Fits both wide and narrow tire - Fits 26" and 700c frames - Compatible with Copilot child seats - 535 grams - 40lbs/18.2kg carrying capacity
Blackburn's EX-1 rack does everything. Built for maximum durability of 9mm aircraft-grade 6061-T6 aluminum, this rack features a 3-strut design to control the load and is compatible with Copilot child seats (sold separately). It fits most bikes.
With an already simple, bombproof design, the Blackburn Grid 2 rear rack improves on the Grid 1 rack by adding an aluminum top deck that acts as a fender and can allow you to mount a trunk style bag. A perfect choice for a hard-core commuter. - Performs great with trunk bags - Light and reflector mounting loop - 45lb/20.5 kg capacity
Make your fat bike a load-hauling master with Axiom's Fatliner. It's disc compatible, and it's made from rugged 6061 T6 aluminum to keep strength to the max and weight to a minimum. There are plenty of mounting options to accommodate all sorts of fat bikes, and it fits dropouts from 170 to 190mm apart. Get fat, get loaded, and go adventure with the Fatliner.
Do you have a bicycle with disc brakes and can't find a rack to go with them? Well, grab Axiom's Journey Disc Rack to carry your gear and you're all set for adventure. It's constructed from durable and light aluminum tubing, and has a looped design for excellent support for even heavy loads. There are also rear bars that prevent panniers swinging in and striking the wheel. The right side of the rack mounts to your eyelets, and the left attaches to the disc brake tab. This great rack also has a platform on top, which adds strength and doubles as a mini fender. And there's a place to mount a taillight, too (sold separately).
Axiom's Streamliner 29er DLX Rack centers loads close to the rear wheel for improved stability and handling on your 29er bike. It's made of reliable and lightweight aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.
Axiom's Streamliner Disc DLX Rack fits on bikes with disc brakes that don't have eyelets. It's made of reliable and light aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.
Axiom's Transit Rack is your trusty friend when it comes to hauling gear. It's tough, it's light and it can hold panniers. Use it to commute, tour or just head to class. It handles heavy loads easily and acts a fender as well.
Page 1 of 1